3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last few years we have added over 75 brands to our shop and we are in the process of expanding our selection to include riding gear, tires, and parts for other Adventure bikes! We are located in Jackson, Mississippi, USA and we ship many of our products worldwide. All products are in stock and ship daily unless the product page states otherwise. Thanks for visiting!
From MotoPumps -
"MotoPumps GPS Mount is here. Strong, light weight, all weather, AMPs pattern so it fits all standard GPS cradles on the market, including all Zumo models, the 200, 220, 346, 390, 395, 396, 400, 450, 500, 550, 590, 595, 660, 665, XT, plus all Montana models with AMPs pattern mounts, including 600, 610, 650, 680, 700 and 750.
MotoPumps developed this mount after being frustrated with the heavy, fragile, overly large, complex and expensive offerings. Machined from DuPont Delrin, the mount is strong, stable, light and 100% weather/corrosion resistant. MotoPumps makes these in Beautiful Upstate NY.
Hardware, specs and instructions included. Hardware is stainless steel and compatible with motorcycle cradles from Garmin for the Zumo series and others using the standard AMPs pattern.
Your kit consists of a 3 piece machined Delrin mounting plate, stainless steel hardware, 3mm allen wrench and instruction sheet. Please read this sheet thoroughly before mounting your device.
Tighten hardware to 7 INCH LBS of torque. If you don’t have an inch lbs torque wrench, that is snug enough to hold, no more. Tight enough to keep your device from moving or rotating on the vehicle cross bar, but not arm tight, not wrist tight, but firmly hand tight with the provided allen key. The stainless and Delrin work together to hold snug without vibrating loose.
(1) Machined base plate with standard AMPs pattern and 3 position Cross Bar Mount (The AMPs hole pattern is an industry standard hole configuration. It consists of four (4) holes located in a rectangular pattern spaced at 1.181" by 1.496" (30mm by 38mm). In most cases the AMPS pattern consists of 8 holes, but is sometimes 4 or 2. This allows the mount to be fitted in both a horizontal or vertical orientation. Most third party mounting devices and cradles have the AMPs hole pattern)
(2, 3) 12mm, 14mm, 16mm, 22mm cross bar clamps
(4,5) Six M4 x .7 x 25mm A2 Stainless Steel Socket Cap Screws (2 hold the cross bar clamps to the base plate, 4 mount your device or GPS cradle, RAM mount or other hardware to the base plate)
4 stainless Steel Washers
1 M3 Hex / Allen wrench for the included socket cap screws.
Note: GPS Cradle not included. The pictured GPS cradle is for a Garmin Zumo 550 and came with the GPS unit when purchased new.
Honda Africa Twin 2016-19, Camel ADV Brace Kit for AT, Honda CB500x 2019 onward, BMW R1200 GS / A ‘14-18, All BMW R1250 GS and GSA, All Yamaha Tenere 700, 2014+ Yamaha Super Tenere XTZ1200, Aprilia Tuareg 660, ‘23 Kawasaki KLE 650 Versys, ‘23 Suzuki VStrom 800DE..
I was extremely satisfied with the high quality products and services you provided. Each item was precisely what I expected. When I had questions, they were answered quickly and thoroughly. 3D Cycle parts is the kind of company that reminds me of a time when the customer mattered and the company went out of their way to earn their business. I have and will continue to recommend 3D Cycle Parts to others in the ADV and motorcycle community based on this experience.
3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last couple of years we have added brands like Eagle Mike, Dirtracks, Maier, Warp 9, Doubletake, Cyclops, Seat Concepts, JNS Engineering, and more aiming to be your one stop shop when it comes to KLR 650 maintenance and upgrades! We are located in Jackson, Mississippi, USA and we ship most products worldwide. All products are in stock and we ship daily unless the product description states otherwise. Please follow us on Facebook and Instagram and don't hesitate to email us if you have any questions. Thanks for visiting!
1903 Highway 49 S Florence, MS 39073
Mon - Fri
9 a.m. - 4 p.m.