3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last few years we have added over 75 brands to our shop and we are in the process of expanding our selection to include riding gear, tires, and parts for other Adventure bikes! We are located in Jackson, Mississippi, USA and we ship many of our products worldwide. All products are in stock and ship daily unless the product page states otherwise. Thanks for visiting!
Now you can finally fix the flash rate on your motorcycle with our unique Plug And Play solution! That's right, our Electronic LED Flasher relay directly replaces the stock flasher relay on most Yamaha, Honda and Kawasaki motorcycles by plugging directly into the harness in place of the OEM flasher relay!
Whether your OEM relay has 2-wires or 3-wires, our flasher relay is a direct replacement for compatible motorcycles, as the 3rd wire is simply a ground connection which our relay does not require. See the compatibility list below for bikes that are known to be Plug-and-Play compatible with our ELFR-1.
For other motorcycles not on this compatibility list, please click here.
For motorcycles with nonstandard two wire flasher relays (not on compatibility list), this flasher relay can still be used by removing the connector and hard-wiring it. Even three wire flasher relays can be replaced if one of the wires is a ground wire.
This unit is guaranteed to replace any two-wire flasher relay and operate at the normal DOT blink rate for motorcycles with stock blinkers, LED blinkers, or any combination of both, provided the total load on the system is within 0.05A to 10A (0.6 Watts to 120 Watts!) - which basically covers the majority of blinker products on the market!
The Custom LED ELFR-1 Plug-And-Play Electronic LED Flasher Relay comes with detailed installation instructions.
Installation of this product requires that you identify and remove the OEM flasher relay motorcycle. If you are unfamiliar with the location of your OEM flasher relay, or electronics in general, please consult a qualified technician or your repair manual for additional information.
Installation of the ELFR-1 is as follows:
Click here to download Installation PDF.
NOTE: In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), additional actions or components may also be required to prevent a wide range of blinker problems. These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps. Problems such as, but not limited to: the 4-way blink problem (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in "blinker mode" due to non-zero blinker voltages. Rest assured that Custom LED has the knowledge, experience, and expertise to tackle any issues that may arise on your motorcycle.
Remember, the Flasher Relay ONLY controls the speed of the blinkers on the motorcycle, and any other problems that arise are independent of the flasher relay, and are resolved separately as well.
I was extremely satisfied with the high quality products and services you provided. Each item was precisely what I expected. When I had questions, they were answered quickly and thoroughly. 3D Cycle parts is the kind of company that reminds me of a time when the customer mattered and the company went out of their way to earn their business. I have and will continue to recommend 3D Cycle Parts to others in the ADV and motorcycle community based on this experience.
3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last couple of years we have added brands like Eagle Mike, Dirtracks, Maier, Warp 9, Doubletake, Cyclops, Seat Concepts, JNS Engineering, and more aiming to be your one stop shop when it comes to KLR 650 maintenance and upgrades! We are located in Jackson, Mississippi, USA and we ship most products worldwide. All products are in stock and we ship daily unless the product description states otherwise. Please follow us on Facebook and Instagram and don't hesitate to email us if you have any questions. Thanks for visiting!
1903 Highway 49 S Florence, MS 39073
Mon - Fri
9 a.m. - 4 p.m.