Address
1903 Highway 49 S Florence, MS 39073
Business Hours
Mon - Fri
9 a.m. - 4 p.m.
SaturdayÂ
closed
Sunday
closed
3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last few years we have added over 75 brands to our shop and we are in the process of expanding our selection to include riding gear, tires, and parts for other Adventure bikes! We are located in Jackson, Mississippi, USA and we ship many of our products worldwide. All products are in stock and ship daily unless the product page states otherwise. Thanks for visiting!
Pannier mounting rack for Suzuki DR650 dual sport motorcycles. Multi use rack.
Mount your own ammo can, Pelican case, aluminum panniers or any luggage with this rack.
Use it with any soft luggage like wolfman, nelson riggs and similar bags.
Mount rotopax gas cans on both sides.
Made of 3/4 inch steel tube construction, powder coated finish. Brackets included to mount your own case.
Easy bolt-on installation.
Features
Powder coated finish
Made from 3/4 inch steel tubing
Easy bolt on installation
Turn signal does not need to be relocated
Comes with the mounting brackets and bolts to mount your own case
Installation
How to install the cases on the racks.
Install the racks on the bike and hold up the cases to the rack. Mark the location with a sharpie.
Remove the racks from the bike.
Place the racks on the back of the cases, make sure they are symmetrical.
Place the mounting brackets in place 2 at the bottom and 1 up in the middle.
Drill the holes for the brackets,bolt on the brackets.
Drill 2 more holes through the 2 welded nuts, make sure that you do not damage the threads.
Remove the rack from the case and drill these 2 holes again with a bigger drill, about 3/8.
Make sure the m8x25mm knobs fit through.
Install the rack on the bike and hang the cases on the rack.
Install the knobs from the inside of the case,hand tighten only to secure the case to the rack use a washer.
Remove the upper bolt from the passenger footpeg bracket.
Remove the front and rear bolt from passenger grab bars.
I was extremely satisfied with the high quality products and services you provided. Each item was precisely what I expected. When I had questions, they were answered quickly and thoroughly. 3D Cycle parts is the kind of company that reminds me of a time when the customer mattered and the company went out of their way to earn their business. I have and will continue to recommend 3D Cycle Parts to others in the ADV and motorcycle community based on this experience.
Tu Combs
Owner
3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last couple of years we have added brands like Eagle Mike, Dirtracks, Maier, Warp 9, Doubletake, Cyclops, Seat Concepts, JNS Engineering, and more aiming to be your one stop shop when it comes to KLR 650 maintenance and upgrades! We are located in Jackson, Mississippi, USA and we ship most products worldwide. All products are in stock and we ship daily unless the product description states otherwise. Please follow us on Facebook and Instagram and don't hesitate to email us if you have any questions. Thanks for visiting!
Business Hours
Mon - Fri
9 a.m. - 4 p.m.
SaturdayÂ
closed
Sunday
closed