Address
1903 US 49 Florence, MS 39073
Business Hours
Mon - Thu
9 a.m. - 4 p.m.
Friday
9 a.m. - 11 a.m. & 12:30 p.m. - 4 p.m.
Saturday-Sunday
closed
3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last few years we have added over 75 brands to our shop and we are in the process of expanding our selection to include riding gear, tires, and parts for other Adventure bikes! Based in Jackson, Mississippi, USA, we offer shipping across the U.S. and to more than 90 countries around the globe. All products are in stock and ship daily unless the product page states otherwise. Thanks for visiting!
**4-26-25 UPDATE*** This harness has been redesigned and now the auxiliary lights also work on low beam!! Their low beam brightness is controlled by a dial on the controller that is built in to the harness, they can be set anywhere between 10%-100% brightness. Switching to high beams goes to 100% power. We will post more info about this update soon.***
***This harness is also an upgrade for our V1 Transalp light kits. If you have a 3D Cycle Transalp Plug & Play Auxiliary Light Kit that is high beam only, you can replace your existing harness with this to gain low beam functionality. ***
This is the same harness that is in our Transalp Plug & Play light kit. If you are using this to build your own light kit, you will need to cut off the existing connectors and add your own connectors, splice on pigtails, etc. The lights you choose must draw less than 1 amps each. You can refer to the complete light kit install video for reference on installation. Light pigtails receive 100% power when high beam is on, and reduced power, 10%-100%, which is set by the dial. This harness only works with LED lights and some LED lights are not compatible due to their circuitry design. We cannot offer any guidance on which lights may or may not work.
Made in Mississippi, USA with only the highest quality components including a collaboration with one of our partners in Japan!
NOTE: Ships within 3 business days when in stock. Will be longer if pre-ordered.
*Requires the Accessory Sub Harness
I was extremely satisfied with the high quality products and services you provided. Each item was precisely what I expected. When I had questions, they were answered quickly and thoroughly. 3D Cycle parts is the kind of company that reminds me of a time when the customer mattered and the company went out of their way to earn their business. I have and will continue to recommend 3D Cycle Parts to others in the ADV and motorcycle community based on this experience.
Tu Combs
Owner
3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last few years we have added over 75 brands to our shop and we are in the process of expanding our selection to include riding gear, tires, and parts for other Adventure bikes! We are located in Jackson, Mississippi, USA and we ship anywhere within the USA. All products are in stock and ship daily unless the product page states otherwise. Thanks for visiting!
Business Hours
Mon - Thu
9 a.m. - 4 p.m.
Friday
9 a.m. - 11 a.m. & 12:30 p.m. - 4 p.m.
Saturday-Sunday
closed