3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last few years we have added over 75 brands to our shop and we are in the process of expanding our selection to include riding gear, tires, and parts for other Adventure bikes! We are located in Jackson, Mississippi, USA and we ship many of our products worldwide. All products are in stock and ship daily unless the product page states otherwise. Thanks for visiting!
What you're looking at is a kit to fix the broken tabs and snap in pegs on all 1st gen KLR650's. Shrouds are getting harder to find in good shape, and when you do they can be expensive. A lot of times the shroud itself is in good shape but the mounting points are broken. If that's what you've got then this is the fix for you! Our snap in peg is threaded in the back and comes with quality stainless steel hardware to attach it to the shroud. Just trim what's left of your old peg flush, drill a hole right in the center of where it was, then attach the new peg. It's that simple. The two L shaped tabs on each shroud are just as simple to replace with our tabs and included stainless steel hardware. This kit incudes 2 short tabs, 2 tall tabs, 2 pegs, and all necessary hardware to install. Shrouds not included.
Hardware excluded, all of these parts are designed, tested, and made in house by me. Your support makes it possible to keep coming up with helpful products like these as well as keep Rotella in my KLR so thank you!! Please let us know if you have any questions. Thanks so much for your support.
I was extremely satisfied with the high quality products and services you provided. Each item was precisely what I expected. When I had questions, they were answered quickly and thoroughly. 3D Cycle parts is the kind of company that reminds me of a time when the customer mattered and the company went out of their way to earn their business. I have and will continue to recommend 3D Cycle Parts to others in the ADV and motorcycle community based on this experience.
3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last couple of years we have added brands like Eagle Mike, Dirtracks, Maier, Warp 9, Doubletake, Cyclops, Seat Concepts, JNS Engineering, and more aiming to be your one stop shop when it comes to KLR 650 maintenance and upgrades! We are located in Jackson, Mississippi, USA and we ship most products worldwide. All products are in stock and we ship daily unless the product description states otherwise. Please follow us on Facebook and Instagram and don't hesitate to email us if you have any questions. Thanks for visiting!
1903 US 49 Florence, MS 39073
Mon - Thu
9 a.m. - 4 p.m.
9 a.m. - 11 a.m. & 12:30 p.m. - 4 p.m.